Dreambox S 7025

Digitaler Satelliten-Empfangsreceiver für TV- und Radioprogramme.

Hauptmerkmal ist der 300 MHz starke Prozessor,
Linux OP, die Dreambox DM7025 unterstützt die Standard Linux API (DirectFB, Linux-FB, LIRC, ... ) und besitzt einen 10/100MBit kompatiblen Netzwerkanschluss.

- 300 MHz Processor
- Linux open source (die meisten Teile unter GPL)
- Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)
- 1 x DVB Common-Interface Einschub
- 2 x Smartcard-Reader
- Integrierter Compact Flash Leser (Einschub von vorne)
- MPEG2 Hardware decoding (DVB kompatibel)
- TWIN Tuner, steck- und mischbar, Plug&Play

- Tunervarianten DVB-S, DVB-C oder DVB-T, steckbar
- 10/100 MBit kompatibler Ethernet Interface
- USB Port
- Anschluß V.24/RS232
- 12V Switch über Cinch
- Großflächiges LC-Display
- 32 MByte Flash
- 128 MByte DDR RAM (Arbeitsspeicher)
- Eingebauter IDE Anschluss
- Festplattenunterstützung für alle üblichen Größen, Timeshiftfunktion
- unlimitierte Kanalliste für TV/Radio
- Kanalwechsel in weniger als einer Sekunde
- vollautomatischer Kanalsuchlauf
- Unterstützung von Bouquet-Listen
- EPG-Unterstützung (electronic program guide)
- Unterstützung von mehrfach LNB-Umschaltung (DiSEqC)
- adaptierbares OSD in vielen Sprachen und Skin-Unterstützung
- S/PDIF optischer Anschluss AC-3
- 2 x Scart-Anschluß
- RF Modulator
- Audio/Video Cinch out
- MINI-DIN: Anschluss für externe IR und I2C
- interne Sende/Empgangs - Dioden (Videorecorder)

DreamBox DM7025 technische Daten

DBS-Tuner:

Eingangsfrequenzbereich 950 …. 2150 MHz
Eingangspegelbereich - 65 dBm …. - 25 dBm
Rauschmaß 12 dB max.
DBS-Tuner Eingang F-Buchse
Eingangsimpedanz 75 Ohm
AFC-Fangbereich +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi und Reed-Solomon
Viterbiraten 1/2, 2/3, 3/4, 5/6, 7/8, automatische Anpassung
Roll-off Factor 35 %
Demultiplexing gemäß ISO 13818-1
 

Common-Interface:
Common-Interface Stromverbrauch max. 0,3A/5V

Videodekodierung:
Videokompression MPEG-2 und MPEG-1 kompatibel
Videostandard PAL G/ 25 Hz
Bildformat 4:3 / 16:9
Bildmaterial 16:9, automatische Anpassung für 16:9 TV-Geräte (über Scart)
Letterbox Filterung für 4:3 TV-Geräte

Audiokodierung:
Audiokompression MPEG-1 & MPEG-2 Layer I und II
Audio Mode Dual (main/sub), Stereo
Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Ausgang Analog:
Ausgangspegel L/R 0,5 Vss an 600 Ohm
THD > 60 dB (1 kHz)
Übersprechen < -65 dB

Ausgang Digital:
Ausgangspegel 0,5 Vss an 75 Ohm
Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Ausgang optisch (AC3)
 

Video-Parameter:
Eingangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
Teletext Filterung entsprechend ETS 300 472 Standard
 

TV-Scart:
Ausgang: FBAS,RGB,S-VHS über OSD wählbar
 

VCR-Scart:
FBAS
 

Serielle Schnittstelle RS 232:
Typ RS232 bi-direktional
Bitrate 115,2 kBit/s max.
Steckverbinder SUB-D-9 Buchse
Funktion: Update der Betriebssoftware

Ethernet:
10/100 MBit kompatibles Interface
Funktion: Update der Betriebssoftware, Verbindung mit dem PC
 

USB:
USB 1.2 Anschluss
 

Mini Din:
I2C zur Steuerung externer Geräte
IR Funktionen senden

Pinbelegung:
1 5V
2 SDA (I2C-Kanal 2)
3 SCL
4 3,3V
7 GND
8 IR-Ausgang
9 GND

UDMA66 IDE Schnittstelle:
Intern für Anschluss HDD max. 500mA
Compact Flash - Reader
 

LNB Stromversorgung:
LNB Strom 500mA max. ; kurzschlussfest
LNB Spannung vertikal < 14V ohne Last, > 11,5V bei 400mA
LNB Spannung horizontal < 20V ohne Last, > 17,3V bei 400mA
LNB Abschaltung im Standby-Mode
 

Anzahl aktiver Satellitenpositionen:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor-Steuerung
 

Leistungsaufnahme:
< 30W (im Betrieb, horizontal Polarisation / 400mA LNB Strom)
< 25W (im Betrieb, ohne LNB)
< 2W (Deep-Standby-Mode)
 

Eingangsspannung:
250V / 50 Hz Wechselspannung +/- 15%
110V / 60 Hz Wechselspannung +/- 15%

 

prijs incl btw  559 euro